• Home
  • Accessories
  • Join Us
  • About Us
  • Case
  • Contact Us

How to solve the indentation on the paper surface after the work of the base paper trimming machine?

When it comes to the problem of creasing in paper edges after using a paper edge trimming machine, there are a few factors that may be contributing to the issue. Some of the most common reasons for this problem include the following:

1. Incorrect Blade Pressure: One of the most common causes of creasing is that the blade pressure is not set correctly. This can happen if the machine is not calibrated properly or if the blade is not correctly aligned with the paper edge. To solve this problem, you will need to recalibrate the machine and check the blade alignment carefully.

2. Inadequate Paper Support: If the paper is not adequately supported during the trimming process, there may be some creasing in the edges. To minimize this, you may need to adjust the support mechanisms or consider purchasing a machine that has better support for the paper.

3. Material and Blade Sharpness Mismatch: Sometimes, the type of blade being used and the type of paper being trimmed do not match correctly, which can cause creasing. For instance, if you’re using a blade that is too sharp or too dull for the material, it can cause some damage. To solve this problem, ensure that your machine has the right type of blade for your paper.

4. Build-Up on Blades: If there is a build-up of paper fibers, glue or other materials on the blades, this can cause creasing. To avoid this problem, ensure that the blades are regularly cleaned and maintained.

In conclusion, creasing can be a common issue when using a paper edge trimming machine, but it can be easily fixed by checking the blade pressure, providing adequate paper support, using the right blade for the material, and maintaining the blades. By following these steps, you’ll be able to maintain high-quality products and avoid any issues with creasing in your paper edges.

Share This Post

Contact Now

How would you like to be contacted?
* We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.