• Home
  • Accessories
  • Join Us
  • About Us
  • Case
  • Contact Us

How to solve the indentation problem after the base paper trimming machine processing

The indentation problem after the base paper trimming machine can be solved by the following steps:

1, check the quality of the base paper to ensure that the base paper does not have the problem of uneven tightness or insufficient edge protection materials, which may lead to indentation when the trimming machine is working.

2. Check and adjust the trimming knife. Check whether the trimming knife is sharp or worn, and sharpen or replace it if necessary. At the same time, the contact Angle and pressure between the trimming knife and the base paper should be properly adjusted to avoid indentation caused by excessive extrusion.

3. Check and adjust the pressure mechanism. Check the pressure mechanism of the trimming machine to ensure that it can provide enough pressure to level the paper surface. If the pressure is insufficient, increase the pressure moderately, but avoid excessive increase, so as not to cause new indentation.

4, maintenance and maintenance Maintain good maintenance and maintenance, including regular cleaning and lubrication work to ensure the normal operating status and performance of the equipment. The trimming machine should be properly preheated and adjusted before production to prevent damage caused by equipment expansion or overheating.

Through the detailed inspection and appropriate adjustment of the above steps, the problem of indentation on the paper surface after the work of the base paper trimming machine can be effectively solved, and the normal work of the paper processing equipment and product quality can be ensured.

Share This Post

Contact Now

How would you like to be contacted?
* We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.